Se Habla Español 
Factory Reconditioned Milwaukee 0612-86 14.4V Cordless 1/2-in Compact Driver/Drill with Work Light & Case
Model#: MILR0612-86
Customer Rating:
-
FREE Ground shipping
on orders over $69!
Offer not valid for AK and HI
Sale:
$149.99
Recon Price:
$169.99
You Save:
$20.00 (12 %)
Availability:
You May Also Like These...
miln48-32-1505
Milwaukee 48-32-1505 40-Piece Screw Driving Bit Set
Shop Now »
Shop Now »
Print Page
The all new compact series is designed to meet the needs of today's contractors. Its compact size allows for use in tighter quarters and provides convenient, hands-free, transportation of the drill while offering a convenient place to store the tool while working. Higher speed allows for faster drilling and fastening and high torque provides the power to use larger bits and drill larger holes. The 14.4 Volt model features a 1/2-in single-sleeve ratcheting chuck for superior grip on bits (bits slip less minimizing downtime). A cushioned, soft-grip, non-slip handle reduces vibration and maximizes comfort. On-board bit storage holds up to two extra driver bits. The patented reversible battery feature allows for use in tighter spaces and provides ultimate balance.
Features:
- High speed - 1,400 RPM
- High torque - 390 in.-lbs.
- Compact size
- 1/2-in single sleeve ratcheting chuck
- Cushioned, anti-slip soft grip for increased comfort
- Exclusive reversible battery pack
- On-board bit storage
- 20 clutch positions
Includes:
- 14.4V Cordless 1/2-in Compact Driver/Drill with Work Light andamp; Case - 0612-86
- (2) 1.7 Amp-Hr. 14.4 Volt Batteries - 48-11-1014
- Charger
- Carrying Case - 48-55-0670
- No. 2 Phillips Bit
- Worklight
- Product Manual
Print Page
| Voltage: | 14.4V |
| Battery Amp Hours: | 1.7 |
| Chuck Type: | 1/2-in |
| RPM: | 0 - 400 / 0 - 1,400 |
| Torque: | 390 in.-lbs. |
| Chuck: | Keyless |
| Reversible Battery: | Yes |
| No. of Batteries Included: | 2 |
| Spindle Lock: | Yes |
| Clutch Settings: | 20 |
| Max. Capacity - Steel: | 1/2-in |
| Max. Capacity - Wood: | 1-3/4-in |
| Length: | 9-1/8-in |
| Tool Weight: | 4.7 lbs. |
| Shipping Weight: | 13.42 lbs. |
| Battery Type: | NiCd |
Print Page
The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after
the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service
/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty
does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than
MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S
MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE
TO THIS RECONDITIONED PRODUCT.
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
