Se Habla Español 
Factory Reconditioned Milwaukee 2490-83 12V Cordless M12 Lithium-Ion 3-Tool Combo with Case
Model#: MILR2490-83
Customer Rating:
What's the difference between New & Factory-Reconditioned?
Find out »
Find out »
-
FREE Ground shipping
on orders over $69!
Offer not valid for AK and HI
- New
- Factory-Reconditioned
Recon Price:
$159.99
Compare to New:
$179.00
Savings vs. New:
$19.01 (11 %)
Availability:
This model is also available New
for $179.00
for $179.00
You May Also Like These...
miln2420-20
Milwaukee 2420-20 12V Cordless M12 Lithium-Ion Hackzall Reciprocating Saw (Tool Only)
Shop Now »
Shop Now »
miln48-32-1700
Milwaukee 48-32-1700 20-Piece Insert Bit Set
Shop Now »
Shop Now »
miln48-11-2401
Milwaukee 48-11-2401 12V 1.5 Ah Li-Ion Compact Battery
Shop Now »
Shop Now »
Print Page
Save when you buy this Combo Savings compared to buying the 12 Volt Li-Ion Impact Driver, 12 Volt Li-Ion Screwdriver, and a 12 Volt Worklight separately!
Kit includes 12V Cordless M12 Lithium-Ion 1/4-in Hex Impact Driver (2450-22), 12V Cordless Lithium-Ion Sub-Compact Driver/Drill (2401-22) and the 12V M12 Work Light (49-24-0145).
Features:
- 12V Cordless Lithium-Ion Sub-Compact Driver/Drill - 2401-22
- Quick bit-loading 1/4-in hex chuck for bit insertion and release with one hand
- Battery fuel gauge for displaying remaining run-time
- Metal Gear Housing for job site durability
- Built-in LED for illumination of dark work spots
- Variable speed trigger for output power control
- Over-mold side and grip for secure grip and work surface protection
- 12V Cordless M12 Lithium-Ion 1/4-in Hex Impact Driver - 2450-22
- Delivering a best-in-class 850-in/lbs. of torque in a compact, lightweight package and weighing less than two and a half pounds
- Powerful enough to drive fasteners up to 75 percent faster and offers up to 2X longer run-time.
- 12V lithium-ion battery offers longer run-time and fade-free performance
- Quick bit-loading 1/4-in hex chuck enables bit insertion and release to be done with one hand
- Variable speed trigger designed for output power control
- Battery fuel gauge displays remaining run-time
- Built-in LED work light for added visibility
- 12V Cordless M12 Work Light - 49-24-0145
- 90-degree pivoting head
- Ergonomic, compact, and lightweight design for operator comfort
- Integrated magnet
Includes:
- 12V Cordless M12 Lithium-Ion 1/4-in Hex Impact Driver (2450-22)
- 12V Cordless Lithium-Ion Sub-Compact Driver/Drill - 2401-22
- 12V Cordless M12 Work Light - 49-24-0145
- (2) 12V Li-ion Battery Packs
- 30-Minute Charger
- Heavy Duty Carrying Case
Print Page
| Voltage: | 12V |
| Battery Amp Hours: | 1.4 |
| Battery Type: | M12 Li-Ion |
| Number of Tools: | 3 |
Print Page
The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after
the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service
/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty
does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than
MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S
MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE
TO THIS RECONDITIONED PRODUCT.
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
Print Page
What's the difference between New and Factory-Reconditioned?
Reconditioned items are returns to major retailers that have been inspected by factory-trained technicians to ensure that they operate like new.- Factory-Reconditioned items offer significant savings vs. new. Minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Factory-Reconditioned items may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with manufacturer warranty and are covered by CPO’s 30 Day Money Back Guarantee.
Reconditioned items are products that have been returned to the manufacturer and are restored to like-new operating condition; they offer significant savings vs. new.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 12V Cordless M12 Lithium-Ion 1/4-in Hex Impact Driver (2450-22), 12V Cordless Lithium-Ion Sub-Compact Driver/Drill - 2401-22, 12V Cordless M12 Work Light - 49-24-0145, (2) 12V Li-ion Battery Packs, 30-Minute Charger, Heavy Duty Carrying Case |
12V Cordless M12 Lithium-Ion 1/4-in Hex Impact Driver (2450-22), 12V Cordless Lithium-Ion Sub-Compact Driver/Drill - 2401-22, 12V Cordless M12 Work Light - 49-24-0145, (2) 12V Li-ion Battery Packs, 30-Minute Charger, Heavy Duty Carrying Case |
| Availability: | In Stock | In Stock |
| Warranty: | 5 year Milwaukee | 1 year Milwaukee |
| Price: | $179.00 | $159.99 |
| You Save: | N/A | $19.01 (11 %) |
