Se Habla Español 
Factory Reconditioned Milwaukee 6509-82 10 Amp Sawzall Recip Saw withCase
Model#: MILR6509-82
Customer Rating:
What's the difference between New & Factory-Reconditioned?
Find out »
Find out »
-
FREE Ground shipping
on orders over $69!
Offer not valid for AK and HI
- New
- Factory-Reconditioned
Recon Price:
$99.99
Compare to New:
$129.99
Savings vs. New:
$30.00 (23 %)
Availability:
This model is also available New
for $129.99
for $129.99
You May Also Like These...
miln49-22-1131
Milwaukee 49-22-1131 Ice Hardened Sawzall Blade 14 Piece Metal Cutting Kit
Shop Now »
Shop Now »
miln49-22-1129
Milwaukee 49-22-1129 Ultimate Demolition Sawzall Blade Kit
Shop Now »
Shop Now »
miln48-00-5021
Milwaukee 48-00-5021 Ax Demo Blade 6 -in 5/8 TPI
Shop Now »
Shop Now »
Print Page
Milwaukee's 10 amp Sawzall Reciprocating Saw is the most durable reciprocating saw on the market, and at only 7 pounds, it offers the best power to weight ratio in its class. The saw offers a 0-2800 strokes per minute variable speed trigger with 3/4-in stroke length and a Quik-Lok blade clamp for fast, tool-less blade changes. The rubber boot provides superior gripping, and the adjustable shoe provides longer blade life and more cut control. The blades can even be clamped upside down for special cutting needs.
Features:
- 10 amp Milwaukee-built motor
- 0-2,800 SPM variable speed trigger
- Quik-Lok blade clamp for fast, easy blade changes
- Double bearing wobble plate mechanism for less vibration
- Center pivot adjustable shoe
- Rubber boot for superior gripping
- Heavy duty 'S' jacket 8 ft. two wire rubber cord
- Double insulated
- Uses standard 1/2-in shank Sawzall blades - blades may be clamped upside down for special cutting needs
Includes:
- 10 Amp Sawzall Recip Saw withCase - 6509-82
- Carrying Case
- (2) Super Sawzall Blades
- Product Manual
Print Page
| Voltage: | 120V |
| Amperage: | 10 |
| Stroke Length: | 3/4-in |
| RPM: | 0 - 2,800 |
| Cord Type: | 8 ft. Fixed |
| Construction Type: | Double Insulated |
| Switch Type: | Trigger |
| Dial Speed Control: | No |
| Keyless Blade Clamp: | Yes |
| Keyless Adj. Shoe: | No |
| Adjustable Handle: | No |
| Orbital Action: | No |
| Counter-Balance: | No |
| Impact Protection: | No |
| Length: | 17-1/3-in |
| Tool Weight: | 7.0 lbs. |
| Shipping Weight: | 12 lbs. |
Print Page
The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after
the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service
/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty
does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than
MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S
MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE
TO THIS RECONDITIONED PRODUCT.
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
Print Page
What's the difference between New and Factory-Reconditioned?
Reconditioned items are returns to major retailers that have been inspected by factory-trained technicians to ensure that they operate like new.- Factory-Reconditioned items offer significant savings vs. new. Minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Factory-Reconditioned items may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with manufacturer warranty and are covered by CPO’s 30 Day Money Back Guarantee.
Reconditioned items are products that have been returned to the manufacturer and are restored to like-new operating condition; they offer significant savings vs. new.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 10 Amp Sawzall Recip Saw withCase - 6509-22, Carrying Case, (2) Super Sawzall Blades, Product Manual |
10 Amp Sawzall Recip Saw withCase - 6509-82, Carrying Case, (2) Super Sawzall Blades, Product Manual |
| Availability: | In Stock | In Stock |
| Warranty: | 5 year Milwaukee | 1 year Milwaukee |
| Price: | $129.99 | $99.99 |
| You Save: | N/A | $30.00 (23 %) |
