Se Habla Español 
Factory Reconditioned Milwaukee 6562-83 14.4V Cordless Caulk/Adhesive Gun with Quart Carriage
Model#: MILR6562-83
Customer Rating:
What's the difference between New & Factory-Reconditioned?
Find out »
Find out »
-
FREE Ground shipping
on orders over $69!
Offer not valid for AK and HI
- New
- Factory-Reconditioned
Recon Price:
$229.99
Compare to New:
$279.99
Savings vs. New:
$50.00 (18 %)
Availability:
This model is also available New
for $279.99
for $279.99
Print Page
The upgraded Milwaukee Caulk/Adhesive Gun delivers the power, speed and control needed for all repetitive caulking applications. A powerful pushing force of 620 lbs. dispenses the highest viscosity materials with ease. A maximum no load pushing speed of 23 inches per minute improves the productivity. The combination of variable speed dials and trigger switch allows for optimal bead control; speed dial to set the application specific speed range while using the trigger switch for fine tuning the bead control. The auto reverse feature prevents unwanted dripping of materials. Interchangeable front ends allow this unit to be converted to dispense the 10 oz. standard tubes or the 20 oz. sausage packs. The lock-off switch prevents accidental start-ups.
Features:
- Powerful 620 lbs. pushing force to dispense highest viscosity materials
- 50% faster than competitive cordless caulk guns
- Remote speed dial and trigger switch allow for optimal bead control
- Dispense up to 76 packs of sub floor adhesive per battery charge
Includes:
- 14.4V Cordless Caulk/Adhesive Gun with Quart Carriage - 6562-83
- (1) 1.7 Amp-Hr. 14.4 Volt Battery - 48-11-1014
- Universal Charger - 48-59-0255
- Quart Size Carriage - 48-08-1080
- Plunger Rod - 49-52-0650
- Product Manual
Resources:
Print Page
| Voltage: | 14.4V |
| Battery Amp Hours: | 1.7 |
| IPM: | 23 in. / min. |
| Carriage: | 30 oz. (Quart) |
| Force: | 620 lbs. |
| Reversible Battery: | Yes |
| No. of Batteries Included: | 1 |
| Trigger Lock: | Off |
| Length: | 22-3/8-in |
| Tool Weight: | 6.8 lbs. |
| Shipping Weight: | 8.91 lbs. |
| Battery Type: | NiCd |
Print Page
The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after
the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service
/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty
does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than
MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S
MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE
TO THIS RECONDITIONED PRODUCT.
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
Print Page
What's the difference between New and Factory-Reconditioned?
Reconditioned items are returns to major retailers that have been inspected by factory-trained technicians to ensure that they operate like new.- Factory-Reconditioned items offer significant savings vs. new. Minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Factory-Reconditioned items may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with manufacturer warranty and are covered by CPO’s 30 Day Money Back Guarantee.
Reconditioned items are products that have been returned to the manufacturer and are restored to like-new operating condition; they offer significant savings vs. new.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 14.4V Cordless Caulk/Adhesive Gun with Quart Carriage - 6562-23, (1) 1.7 Amp-Hr. 14.4 Volt Battery - 48-11-1014, Universal Charger - 48-59-0255, Quart Size Carriage - 48-08-1080, Plunger Rod - 49-52-0650, Product Manual |
14.4V Cordless Caulk/Adhesive Gun with Quart Carriage - 6562-83, (1) 1.7 Amp-Hr. 14.4 Volt Battery - 48-11-1014, Universal Charger - 48-59-0255, Quart Size Carriage - 48-08-1080, Plunger Rod - 49-52-0650, Product Manual |
| Availability: | In Stock | In Stock |
| Warranty: | 5 year Milwaukee | 1 year Milwaukee |
| Price: | $279.99 | $229.99 |
| You Save: | N/A | $50.00 (18 %) |
