Se Habla Español 
Factory Reconditioned Milwaukee 9075-80 3/4-in Square Drive Impact Wrench with Rocker Switch
Model#: MILR9075-80
Customer Rating:
What's the difference between New & Factory-Reconditioned?
Find out »
Find out »
-
FREE Ground shipping
on orders over $69!
Offer not valid for AK and HI
- New
- Factory-Reconditioned
Recon Price:
$239.99
Compare to New:
$289.99
Savings vs. New:
$50.00 (17 %)
Availability:
This model is also available New
for $289.99
for $289.99
You May Also Like These...
miln49-24-0280
Milwaukee 49-24-0280 V28 28-Volt Lithium-Ion Job Site Radio
Shop Now »
Shop Now »
miln2201-20
Milwaukee 2201-20 Voltage Detector with Light
Shop Now »
Shop Now »
Print Page
Delivering a whopping 380 ft. lbs. of torque and weighing only 6.2 pounds, this tool has a fantastic power to weight ratio. The 3/4-in square anvil is more resistant to long term fatigue than a 1/2-in anvil. The powerful 7.0 amp motor drives a unique impact mechanism at 1750 RPM (no load). This model features a friction ring and through hole socket retention, and a rocker switch for quick selection of forward or reverse. The ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel to the tool. The special mechanism achieves desired installation torque faster and loosens rusted or fretted bolts in less time.
Features:
- 380 ft.-lbs. of torque - more torque saves time
- AC-DC rocker switch for quick selection of Forward and reverse
- Powerful 7 amp motor, 1,750 RPM and 2,500 IPM (no load)
- Lightweight (6.2 lbs.) with balanced feel and cushioned grip
- Friction ring and through hole socket retention
Includes:
- 3/4-in Square Drive Impact Wrench with Rocker Switch - 9075-80
- Product Manual
Resources:
Print Page
| Voltage: | 120V |
| Amperage: | 7 |
| Drive Size: | 3/4-in Square |
| Torque: | 380 ft.-lbs. |
| RPM: | 1,750 |
| BPM: | 2500 |
| Cord Type: | 8 ft. Fixed |
| Switch Type: | Rocker |
| Soft Grip Handle: | Yes |
| Socket Retention: | Thru Hole withHog Ring |
| Length: | 11-5/8-in |
| Tool Weight: | 6.2 lbs. |
| Shipping Weight: | 7.22 lbs. |
Print Page
The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after
the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service
/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty
does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than
MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S
MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE
TO THIS RECONDITIONED PRODUCT.
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
Print Page
What's the difference between New and Factory-Reconditioned?
Reconditioned items are returns to major retailers that have been inspected by factory-trained technicians to ensure that they operate like new.- Factory-Reconditioned items offer significant savings vs. new. Minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Factory-Reconditioned items may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with manufacturer warranty and are covered by CPO’s 30 Day Money Back Guarantee.
Reconditioned items are products that have been returned to the manufacturer and are restored to like-new operating condition; they offer significant savings vs. new.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | 3/4-in Square Drive Impact Wrench with Rocker Switch - 9075-20, Product Manual |
3/4-in Square Drive Impact Wrench with Rocker Switch - 9075-80, Product Manual |
| Availability: | In Stock | In Stock |
| Warranty: | 5 year Milwaukee | 1 year Milwaukee |
| Price: | $289.99 | $239.99 |
| You Save: | N/A | $50.00 (17 %) |
