Factory Reconditioned Milwaukee 2470-80 M12 12V Cordless Lithium-Ion PVC Shear (Tool Only)

Model: milr2470-80
        (5) Write A Review

This item is temporarily out of stock. Want an email when it’s back in stock?

OUT OF STOCK
Factory Reconditioned Milwaukee 2470-80 M12 12V Cordless Lithium-Ion PVC Shear (Tool Only) Model: milr2470-80

Product Features & specs :

Factory Reconditioned Milwaukee 2470-80 M12 12V Cordless Lithium-Ion PVC Shear (Tool Only)

Details
Buy with confidence! Our Reconditioned items include all necessary parts and are guaranteed to function like new, backed by our 120 Day Money Back Guarantee. Please note however that reconditioned units received from the manufacturer may or may not include accessories shown with this listing.
Features:
  • Powerful Mechanism - Cuts up to 2 in. schedule 40 PVC in 3 seconds
  • Offset Blade - Cuts plastic pipe in-wall, in-ground, or close to wall
  • Ultra Sharp Blade with Pierce Point - No burrs or shavings to remove
  • Quick Return Blade - Increased productivity during repetitive cuts
  • All Metal Planetary Drive - Delivers over 200 cuts per charge
  • Stainless Steel Blade and Aluminum Jaw - Impact, water and rust resistant
  • Variable Speed Trigger - Controlled cut in warm or cold weather
  • On Board Fuel Gauge - Displays remaining run-time
  • Ability to cut the following material: PVC (up to Schedule 80), CPVC, PEX tubing, BlazeMaster CPVC, ABS, non-metallic conduit, and rubber hose
  • Part of the M12 System of over 90 tools
What’s Included:
  • M12 12V Cordless PVC Shear (Tool Only) - 2470-80
  • Tool Only - Battery and Charger Sold Separately
Series
FUEL
Cordless
Yes
Length
14 in.
Width
3.4 in.
Height
4.5 in.
Weight
4.3 lbs.
Batteries Included
0
Battery System
M12
Battery Type
Li-Ion
Bluetooth Compatibility
No
CSA Safety
Yes
Case Included
No
Charge Time
30 Minutes
Charger Included
No
ETL Safety
Yes
Motor Type
Brush
Power Source
Cordless
UL Safety
Yes
Voltage
12V
Wifi compatibility
No

Reviews :

4.6 / 5.0
36 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
25
9
1
1
0
Would you recommend this product?
Yes (27)
Pros
Easy To Use (16)
Powerful (16)
Ergonomic Design (5)
Value (3)
Cons
Heavy (4)
Uncomfortable to Use (1)
Best Uses
Heavy Duty Requirements (6)
Large Projects (6)
Home Repair (5)
Jobsite (5)
Perfect
Everything I hoped it would be. Cut down my time installing pipe with nice clean cuts.
June 8, 2019
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Battery Longevity (if applicable)
Lightweight
Best Uses
Heavy Duty Requirements
Large Projects
Small Projects
Wish I bought this 20 years ago!
May 26, 2019
Purchased
7 months ago
Describe Yourself:
Professional
Easy to use. Saves valuable time.
May 25, 2019
Pros
Easy To Use
Ergonomic Design
Powerful
Value
Battery Longevity (if applicable)
Lightweight
Best Uses
Frequent Use
Heavy Duty Requirements
Large Projects
Small Projects
Home Repair
Jobsite
The finest tool for the job!
Super easy to use clean efficient cuts one handed operational and easily will do a full day of heavy cutting with plenty of battery to spare, perfect for up to 2 inch PVC schedule 40 and schedule 80 still cuts like a hot knife through butter! I don't think I could ever go back to manual cutters this is a money maker with time savings and my hands are no longer in pain from those hard to use cutters on a regular basis. I can do hundreds of cuts in a day and no waste no mess no pain! I love this tool! Thank you Milwaukee and M 12 rocks!
January 4, 2019
Purchased
11 months ago
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Powerful
Cons
Uncomfortable to Use
Best Uses
Jobsite
PVC cutter
This tool is larger than hand held and requires a bit of getting used to. Trigger and button not best ergonomics. First cuts are not straight.
Reconditioned tool arrived dirty and scuffed. Appears as a used rebuilt rather than reconditioned mis manufactured.
Good for repeated jobsite work to save on hand held fatigue.
August 22, 2018
Purchased
1 year ago

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 16 answers
Will this cut 2 inch pvc ?
A shopper on Jun 18, 2017
BEST ANSWER: Yes used it on 2" PVC and it cut it very well but that is the largest it will cut

Warranty:

The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service /Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents. THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE TO THIS RECONDITIONED PRODUCT.

All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.


Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.

Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.

MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.

This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.

Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878