Milwaukee 0300-20 8 Amp 0 - 850 RPM 1/2 in. Corded Magnum Drill with Soft Grip

Model: miln0300-20
        (6) Write A Review

We’re sorry, but this item is no longer available.

Milwaukee 0300-20 8 Amp 0 - 850 RPM 1/2 in. Corded Magnum Drill with Soft Grip Model: miln0300-20

Product Features & specs :

Milwaukee 0300-20 8 Amp 0 - 850 RPM 1/2 in. Corded Magnum Drill with Soft Grip

Details
This powerful 8.0 AMP 1/2 in. Drill has the construction and performance to eliminate any other 1/2 in. drill in its category.
Features:
  • Powerful 8 amp motor, 0-850 RPM, variable speed control
  • Heavy-duty keyed chuck
  • All metal gear case and diaphragm
  • 8 ft. 3-wire rubber cord
  • 360 degrees locking side handle
  • Ergonomic tactile grip and two finger trigger for user comfort and balance
  • This item may ship in the original manufacturer's packaging.
What’s Included:
  • 1/2 in. Magnum Drill, 0-850 RPM with Keyed Chuck - 0300-20
  • Side Handle
  • Chuck Key with Holder
  • Product Manual
Length
13.19 in.
Width
3.06 in.
Height
9.81 in.
Weight
5.4 lbs.
Amperage
8
Bluetooth Compatibility
No
CSA Safety
No
Case Included
No
Chuck Size
1/2 in
Chuck Type
Keyed
Clutch Settings
No
ETL Safety
No
Handle Type
Pistol
Maximum Torque
1
Motor Type
Brushed
No-Load Speed (RPM)
0-850
Power Settings
1
Power Source
Corded
UL Safety
Yes
Variable Speed Trigger
Yes
Voltage
120V
Wifi compatibility
No

Reviews :

4.7 / 5.0
6 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
2
0
0
0
Would you recommend this product?
Yes (5)
Pros
Easy To Use (4)
Powerful (4)
Ergonomic Design (3)
Value (1)
Best Uses
Frequent Use (1)
Heavy Duty Requirements (1)
Large Projects (1)
Great for its size
I build custom truck bumpers as a side job an needed a good powerful drill. This thing will punch 1/2 inch holes through 1/4 inch plate steel all day long an not skip a beat. It will struggle with a 1 inch hole saw on the same steel but it will keep kicking for a good 30 min of hard use. Very impressed.
March 2, 2019
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
GOOD BET
DRILLED AN ENTIRE HOUSE FOR WIRING IN 1/2 A DAY WITH A 1" SHIPS AUGER AND IT BARELY GOT WARMED UP.
GREAT DRILL, ALWAYS HAS BEEN
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Great drill
Great for drilling steel and hole saws
May 9, 2014
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Best Uses
Frequent Use
best corded drill made
have owned this drill for over 25 years the best drill for the money hands down !!
October 31, 2013
Would you recommend this product?
Yes
Rebuilt- No big deal.
After the first hole, no one could tell I just bought a rebuilt drill. I would not have used the case anyway and it works like new at a fraction of the cost.
The side handle attaches securely and is strong enough to handle the torque. The keyed chuck is needed for larger bits, would not want a keyless for a 1/2" drill.
April 9, 2013

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 2 questions Browse 2 questions and 2 answers
Can you mix thin set and grout with this drill?
Kevin on Nov 28, 2015
BEST ANSWER: Yes, the Milwaukee 0300-20 can be used to mix grout and thin set
I need to know if the drill has a locking trigger.
Marilyn on Aug 28, 2015
BEST ANSWER: The Milwaukee 0300-20 1/2 in. Magnum Drill, 0 - 850 RPM with Keyed Chuck does not have a locking trigger.

Warranty:

The Milwaukee Warranty Every MILWAUKEE power tool is tested before leaving the factory and is warranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE's discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

The warranty period for V28, M12 and M18 Li-Ion Battery Packs is two (2) years from the date of purchase. XC M18 Battery packs carry a (3) year warranty. The warranty period for Ni-Cd Battery Packs, Flashlights, Radios, and Professional Hoists (lever, chain, and electric) is one (1) year from the date of purchase.

*The warranty period for Portable Generators is two (2) years from the date of purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878