Milwaukee 2455-20 M12 12V Cordless Lithium-Ion No Hub Driver (Tool Only)

Model: miln2455-20
        (5) Write A Review

We’re sorry, but this item is no longer available.

Milwaukee 2455-20 M12 12V Cordless Lithium-Ion No Hub Driver (Tool Only) Model: miln2455-20

Product Features & specs :

Milwaukee 2455-20 M12 12V Cordless Lithium-Ion No Hub Driver (Tool Only)

Details
The first no-hub driver in the industry lets you accurately fasten up to 300 steel clamps on a single charge. The revolutionary M12 Cordless Lithium-Ion No-Hub Driver lets you quickly install no-hub couplings with accuracy and repeatability. Powered by the M12 REDLITHIUMâ„¢ Battery Pack (sold separately), it fastens up to 300 steel clamps on a single charge, and is proven to be accurate for up to 25,000 clamps before re-calibration is needed. It features torque settings for 60 in-lbs and 80 in-lbs, and LED indicators for when torque limit is reached and recalibration is required. Weighing just 2.75 lbs, this subcompact cordless tool is designed for user comfort and reduced user fatigue. Use it in 0-750 RPM Drill Mode for general drilling and fastening applications.
Features:
  • Specific Torque Settings for 60 and 80 in-lbs. - Fast accurate installtion of no-hub couplings
  • Auto Shut-Off w/ LED Indicator - Alerts users that torque limit has been achieved
  • 0-750 RPM Drill Mode - Increased utility for general drilling and fastening
  • LED Calibration Indicator - Alerts user when calibration is needed (25,000 cycles)
  • Part of the M12 System of over 90 tools
What’s Included:
  • M12 12V Cordless Lithium-Ion No Hub Impact Driver (Tool Only) - 2455-20
  • Belt Clip
  • Tool Only - Battery and Charger Sold Separately
Series
FUEL
Cordless
Yes
Length
7.44 in.
Width
3.31 in.
Weight
2.35 lbs.
Batteries Included
0
Battery System
M12
Battery Type
Li-Ion
Bluetooth Compatibility
No
CSA Safety
No
Case Included
No
Charger Included
No
Drive Size
1/4 in
Drive Type
Hex
ETL Safety
Yes
Handle Type
Pistol
Maximum Speed (RPM)
750
Maximum Torque
60/80
Motor Type
Brushed
No-Load Speed (IPM)
0-3500
Power Settings
2
Power Source
Cordless
UL Safety
Yes
Variable Speed Trigger
Yes
Voltage
12V
Wifi compatibility
No

Reviews :

4.8 / 5.0
5 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
1
0
0
0
Would you recommend this product?
Yes (5)
Pros
Easy To Use (5)
Powerful (5)
Ergonomic Design (4)
Best Uses
Frequent Use (4)
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Best Uses
Frequent Use
Great tool
Works as advertised
May 6, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Best Uses
Frequent Use
All DAY COMMERCIAL QUALITY
This Tool makes sore wrists from handle torque wrenches a thing of the past. 60 and 80 lb setting lets you work with anything from standard two band clamps all the way to 8 band extra heavy clamps without breaking anything with a different style drill. WORTH THE MONEY.
October 28, 2015
Describe Yourself:
Professional
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Best Uses
Frequent Use
LONG LASTING AND POWERFUL
FOR SUCH A COMPACT TOOL IT HAS TONS OF POWER AND LIFE.
July 14, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Excellent No hub torch driver
This is torch driver is excellent for torching no hub bands. My only complain is its slow.
I'm used to using the 12v impact driver and its fast. if i'm removing bands and putting new ones
on i'm not gonna waste my time with the torch driver. Its just too slow. If all i'm doing
is installing new bands then I use it so I know I get it good and tight.
July 5, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Best Uses
Frequent Use
POWERFUL AND DEPENDABLE
SMALL POWERFUL AND LONG LASTING.
June 24, 2015

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Warranty:

The Milwaukee Warranty Every MILWAUKEE power tool is tested before leaving the factory and is warranted to be free from defects in material and workmanship. MILWAUKEE will repair or replace (at MILWAUKEE's discretion), without charge, any tool (including battery chargers) which examination proves to be defective in material or workmanship from five (5) years after the date of purchase. Return the tool and a copy of the purchase receipt or other proof of purchase to a MILWAUKEE factory Service/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty does not cover damage from repairs made or attempted by other than MILWAUKEE authorized personnel, abuse, normal wear and tear, lack of maintenance, or accidents.

The warranty period for V28, M12 and M18 Li-Ion Battery Packs is two (2) years from the date of purchase. XC M18 Battery packs carry a (3) year warranty. The warranty period for Ni-Cd Battery Packs, Flashlights, Radios, and Professional Hoists (lever, chain, and electric) is one (1) year from the date of purchase.

*The warranty period for Portable Generators is two (2) years from the date of purchase.

THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.

THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.

This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.

Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878