Milwaukee 2872-20 M18 Brushless Threaded Rod Cutter (Tool Only)

Model: miln2872-20
ratings        (9) Write A Review

Want an email when this item is in stock?

OUT OF STOCK
Milwaukee 2872-20 M18 Brushless Threaded Rod Cutter (Tool Only) Model: miln2872-20

Product Features & specs :

Milwaukee 2872-20 M18 Brushless Threaded Rod Cutter (Tool Only)

Details
The MILWAUKEE M18 Brushless Threaded Rod Cutter is a dedicated solution for cutting the most common threaded rod sizes on the job site, including coarse 1/4 in., 3/8 in. and 1/2 in. mild steel to 1/4 in. and 3/8 in. stainless steel. The cordless threaded rod cutter is powered by a brushless motor and delivers 400+ cuts while powered by an M18 REDLITHIUM 2.0Ah Battery. The four-sided cutting dies allow users to cut multiple sizes of threaded rod on one tool by simply rotating the dies. The all thread cutter has the clearest line of sight and delivers clean, burr-free cuts allowing nuts to be threaded on by hand without having to file down the ends. The rod cutter features optimized blade geometry and cut speed to prevent chips and sparks while cutting. It has auto jaw opening allowing fast, repetitive cuts while a reverse button helps prevent unintended cuts. Its centered grip provides the best balance for one-handed overhead trims, while the flat horizontal design provides users with a stable surface for benchtop cuts.
Features:
  • Improved Cutting, No Chips or Sparks
  • Cuts 1/4 in., 3/8 in. & 1/2 in. Mild Steel, 1/4 in. & 3/8 in. Stainless Steel, Coarse Threaded Rod
  • Brushless Motor provides more power, more run-time, and longer life.
  • Flat Horizontal Position for Benchtop Use
  • Clearest Line of Sight While Making Overhead Cuts
  • 1-1/2 in. Trim Length Delivers Even, Uniform Cuts Every Time
  • Auto Jaw Opening for Fast, Repetitive Cuts
  • Four Sided Rotatable Cutting Dies Allow You to Cut Three Different Sizes of Threaded Rod with the Same Tool
  • Reverse Button for Unintended Cuts
  • LED Light Illuminates Cut Area
What’s Included:
  • M18 Brushless Threaded Rod Cutter - 2872-20
  • Upper & Lower Cutting Dies - 48-44-2872
  • Allen Key
  • Battery and charger sold separately
Power Source
Cordless
UL Safety
Yes
CSA Safety
No
Wifi compatibility
No
Batteries Included
0
Battery Type
Li-Ion
Cutting Capacity
1/4 in / 1/2 in / 3/8 in
Case Included
No
Bluetooth Compatibility
No
Voltage
18V
Motor Type
Brushless
Battery Warranty
2 Year
Charger Included
No
ETL Safety
No
Battery System
M18
Length
10 in.
Width
5 in.
Height
6.30 in.
Weight
7.70 lbs.
Warranty Term
5 Year

Reviews :

4.6 / 5.0
9 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
6
2
1
0
0
Would you recommend this product?
Yes (1)
Pros
Easy To Use (1)
Powerful (1)
Battery Longevity (if applicable) (1)
Cons
Heavy (1)
Best Uses
Frequent Use (1)
Heavy Duty Requirements (1)
Large Projects (1)
Small Projects (1)
This is revolutionary tool for cutting all thread
This is my go to tool for cutting all thread on the ground or in the air . For burr free cutting this is a must . Easy to use and dependable.
August 21, 2020
Originally posted at
Envy of the Electrical Department
A great tool for quickly cutting threaded rod when we need it to mount our PLC panels underground! Very quick and precise cutting, has easily halved the time it took me before to prep my rod mounts. Just be careful when cutting that you keep the thread parallel to the cutting head, as any deviation will cause a hassle when trying to thread nuts on. Overall a great help on the job!
June 2, 2020
Originally posted at
Milwaukee Threaded rod cutter
This is a great addition to my Milwaukee collection of tools. This rod cutter works great , it cuts the rod flush and nut ready. I have cut all three sizes of rod with it and all three are three are the same, Great. It is great to pre cut your threaded rod or it is light enough to take up in the ceiling and cut the extra rod off of your hangers.
May 24, 2020
Originally posted at
Highly recommended
Easy to use, and works great. Occasionally there is a burr that gets left behind that needs cleaned up, but overall it works great.
May 23, 2020
Originally posted at
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Battery Longevity (if applicable)
Cons
Heavy
Best Uses
Frequent Use
Heavy Duty Requirements
Large Projects
Small Projects
Home Repair
Jobsite
Works well,and is very fast. But My God ,the thing is super heavy!!!
Good tool, I only buy Milwaukee... So I know it will be made well.
May 14, 2020
Purchased
7 months ago
Describe Yourself:
Professional
Fast and easy
This saves time trimming threaded rod overhead. Also it saves me from throwing grinder sparks on my customers inventory. Great product.
September 18, 2019
Originally posted at
Fast and easy
This saves time trimming threaded rod overhead. Also it saves me from throwing grinder sparks on my customers inventory. Great product.
September 18, 2019
Originally posted at
Not for 1/2" rod.
This tool can cut 3/8" and smaller with ease but when it comes to the big stuff a band saw would be quicker. It takes anywhere from 3-7 swings to get through 1/2". So if you cut mostly 1/2", this isn't a good investment.
June 25, 2019
Originally posted at
Best thing since sliced bread!!
Im actually not sure about that because i was not around before sliced bread but i definitely love this tool for cutting big rods. When before there were so many rods i had to take care of now this device handles even the biggest and hardest of rods with ease and precision. and the best part i can do it with one hand!!!!
April 2, 2019
Originally posted at

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 2 answers
can we buy dies for 5/16 national coarse?
Garry S on Sep 11, 2019
BEST ANSWER: Please contact the manufacturer directly at 1-800-729-3878. The agent will be able to better assist you with locating the items.